Section 5. SetupPOS Utility
SetupPOS is a setup utility for registering, modifying, or deleting devices and port
environments of EPSON OPOS ADK to the system registry.
On Windows 2000, Windows XP or Windows Vista, depending on the permissions of the
user, the user may only be able to view the settings but does not have the ability to register
or modify the settings without a few exceptions.
5.1. Starting and Exiting
5.1.1. Starting SetupPOS
At the end of the installation, continue and use this utility.
Or, after installation, click the [Start] button, point to Programs, and then select
[OPOS]. Finally, select [SetupPOS Ver2.00] to start the utility.
5.1.2. Exiting SetupPOS
Use one of the following three methods to exit the program.
1. In the SetupPOS main window, select Exit from the File menu.
2. Click the [Close] button in the upper right corner of the window.
3. Click the
menu, select Close.
mark in the upper left corner of the window. From the shortcut
64
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009