Epson H6000IIP - TM Two-color Thermal Line User Manual page 41

3.3.2.4. Version1.xx and Version2.60 Coexisting Installation
Coexistence implies that the devices of Version 1.xx and the devices of Version
2.60 operate simultaneously. The above versions are able to coexist, but it is
recommended to use Version 2.60 alone since there are some restrictions as
follows:
This overwriting is not able to overwrite in Windows Vista environment.
<Restrictions on coexistence>
Hydra settings devices on the same port cannot coexist and be shared between
versions.
(Example)
In this case, the whole settings cannot be succeeded as they are unless Printer,
Display and Drawer are also installed in Version 2.60.
Only the printer information is succeeded, and the device settings for Display and
Drawer are deleted.
It is not possible for devices with shared keyboard interface to coexist and be
shared by different versions.
(Example)
In this case, the whole settings cannot be succeeded as they are unless both
Keylock and MSR are also installed in Version 2.60. Only the Keylock information
is succeeded, and the device settings for MSR are deleted from both versions.
The restrictions apply to the following devices.
COM hydra
Keyboard hydra : MSR, Keylock
<Installation Procedure>
From (1) to (4) steps are the same as those described in "3.3.1 First
Installation". Please refer to "3.3.1 First Installation" of this manual.
Version 1.xx : Printer, Display, Drawer are hydra settings.
Version 2.60 : When printer alone is intended installed.
Version 1.xx : MSR, Keylock.
Version 2.60 : When Keylock alone is intended installed.
: Printer, Display, Drawer, MICR, CheckScanner
36
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009