Epson H6000IIP - TM Two-color Thermal Line User Manual page 37

(9) When all the operations are completed, the "InstallShield Wizard
Complete" dialog box is displayed.
Select in the check box whether or not to display the release note on the
installed EPSON OPOS ADK. It is strongly recommended to read the
notes.
(10) If system files are renewed because of the installation, rebooting of system
may be requested. In this case, please specify whether rebooting right
away or later, and execute the rebooting.
If later rebooting is specified, make sure to reboot after the completion of
the installation. The operation under the un-rebooted environment is not
guaranteed at all.
(11) Installation is completed. The SetupPOS utility starts up. Confirm the
settings in accordance with the setup described in "Section 5. SetupPOS
Utility" of this manual.
When system rebooting is executed, SetupPOS utility does not start
automatically. Please start SetupPOS utility from start menu.
Installer, SetupPOS, TMUSB
32
User's Manual
Version 2.65 Jul. 2009