Epson H6000IIP - TM Two-color Thermal Line User Manual page 117

5.3.1.3. Communication Settings Screen (for serial, parallel, or USB)
In this screen, set a port to connect as well as its details.
This screen appears if a device of the serial, parallel, or USB port is selected in
the add device screen.
"A setup of the port" combo box
Depending on the type of port of the selected device, the following combo boxes
are available.
For serial port : "COM Port Settings" combo box
For parallel port : "LPT Port Settings" combo box
For USB port
From the combo box, select a port number for the serial, parallel, or USB port.
If "None" is selected, then the port settings will be deleted.
For serial and parallel ports, it is possible to use the port range dialog box to
change their port ranges.
For USB port, when the communication settings screen appears, all of the USB
driver's connectable ports become the selectable range.
: "USB Port Settings" combo box
112
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009