Epson H6000IIP - TM Two-color Thermal Line User Manual page 98

are added with UPOS 1.5, this setting cannot be changed; this is
possible only when version 1.xx of EPSON OPOS ADK is used.
Specify a track for storing the JIS-II data.
Set track 3 to the JIS-II data.
If the check box is cleared (default): Store JIS-II data to track 4.
If the check box is selected: Store JIS-II data to track 3.
Usually, do not select this check box.
It is possible to operate OPOS ADK in the same way as version 1.xx.
[OK] button
Close the dialog box and save the version compatibility settings to the
registry.
[Cancel] button
Use this button to cancel the setting and close the dialog box.
[Help] button
Use this button to display the help on the dialog box by clicking this
button.
viii. Change of component
Use this menu command to start the installer to register or delete
EPSON OPOS ADK/CCO.
Change EPSON OPOS ADK:
Start the installer (SetupPOS.exe).
After the installer starts, SetupPOS ends.
Change CCO:
Start the CCO Installer/Uninstaller.
Even if the Installer/Uninstaller starts, SetupPOS does not end.
On Windows 2000, Windows XP and Windows Vista, the user must
have the administrative permissions in order to use this function.
<Change of component dialog box>
To change EPSON OPOS ADK:
" The path of the install file " edit field
The path of the install file of EPSON OPOS ADK appears in the edit
field.
The default path displayed:
If only version 1.xx is installed: (installed folder)\Setup.exe
Installer, SetupPOS, TMUSB
93
User's Manual
Version 2.65 Jul. 2009