Epson H6000IIP - TM Two-color Thermal Line User Manual page 134

(1) When running the interactive CheckHealth,
Its execution result appears.
<Export registry dialog box>
(1) When exporting the registry, the following message appears:
" OPOS registry is kept as registry data file. To keep registry data file, the
backup copy of "OPOS ADK Disk-1" is made, it, drive A : Insert it. The same
OPOS environment can be reproduced by using "OPOS ADK Disk-1" that it
is renewed on this more than one target machine. "
All : Register all information.
Selecting : Register selected items' information.
Hydra : Register all information about Hydra connection.
(2) When overwriting a file,the following message appears:
" (A file name) already exists! Do you want to replace them? ([Yes]=Replace.
[No]=Append.) "
<Port range dialog box>
(1) When specifying a number small than the maximum number of COM ports
used by devices, the following message appears:
"Currently using a COM port that is higher than the specified maximum
value. Cannot set COM Port maximum."
(2) When specifying a number small than the maximum number of LPT ports
used by devices, the following message appears:
"Currently using a LPT port that is higher than the specified maximum value.
Cannot set LPT Port maximum."
<Trace settings dialog box>
(1) When changing the trace settings for TM-T88IVM and selecting an another
device, the following message appears:
"Trace settings for POSPrinter\TM-T88IVM have been changed. Do you
want to save the change(s) ?"
<Message handling dialog box>
(1) During synchronization, if message handling is selected, the following
message appears:
" Do not execute OPOS methods/properties when the OPOS method is
executed during synchronous. Otherwise, it is possible that the program may
unexpectedly hang. Do you want to change it ?"
<Sleep time settings dialog box>
129
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009