Epson H6000IIP - TM Two-color Thermal Line User Manual page 28

Version 2.65 Jul. 2009
(2) The "Welcome" dialog box is displayed.
Select the arbitrary option and then select the [Next] button. After this
procedure is different depending on the select option. When the "Modify"
has been selected, the "Select CO Type" dialog box is displayed.
When the "Repair" has been selected, the "Setup Status" dialog box is
displayed. When the "Remove" has been selected, the confirmation
message to removing is displayed.
When the "Yes" has been selected, the uninstaller gets started.
When the "No" has been selected, this dialog is displayed again.
Select the [Cancel] button for quitting.
23
User's Manual
Installer, SetupPOS, TMUSB