Epson H6000IIP - TM Two-color Thermal Line User Manual page 73

Version 2.65 Jul. 2009
Use this menu command to display the Add New Device wizard and add
a new device to the device class. The device class displayed here refers
to devices prepared by the install program. For details, see the Section 5.
"5.3.1. Using the Add New Device wizard" of this manual. On Windows
2000, Windows XP and Windows Vista, the user must have the
administrative permissions in order to use this function.
vii. Add New LDN
Use this menu command to display the "Add New LDN" dialog box and
add a logical device name to a device.
A logical device name that has already been used by the same device
class cannot be specified. When re-specifying a logical device name that
has been used and then deleted the corresponded device, a
confirmation message appears that is whether to replace the old logical
device name with the new one. On Windows 2000, Windows XP and
Windows Vista, the user must have the administrative permissions in
order to use this function.
<About the dialog box for adding logical device name>
"Choose DeviceClass." combo box:
Select a device class for adding the logical device name. If the device
class has already been selected in the window, then it appears in the
combo box by default; otherwise the device classes appear in standard
way or by name. Also, only device classes which the control objects
(CO) supporting the device is installed are listed in the combo box.
"Choose DeviceNameKey" combo box:
Select a device name key for adding the logical device name. If the
device name key has already been selected in the window, then it
68
User's Manual
Installer, SetupPOS, TMUSB