Epson H6000IIP - TM Two-color Thermal Line User Manual page 130

the type of the selection, as follows:
· If all items are selected
· If only some items are selected
· If all items are cleared
"Incorrect Hydra mark(s):" list box
This list box indicates inconsistency in the Hydra information set in the
registry.
It first shows the correct setting (ON or OFF).
This problem only occurs in Hydra settings for version 1.xx of the
application.
It occurs when there is inconsistency in the Hydra or Shydra registry
setting, which indicates Hydra.
"Bad uses:" list box
This list box indicates inconsistency in Hydra's master device information
set in the registry.
The registry of each Hydra-related device must have information of the
master device (Uses).
If this information is illegal, the inconsistency in the master device is
listed, and then the correct master device is installed.
Hydra settings selected here will be automatically corrected.
To continue using the illegal Hydra settings despite the warning, just
clear the selections from the list box.
Usually, the SetupPOS program automatically registers normal Hydras
to the registry.
The Hydra settings inconsistency may occur when the OPOS registry is
modified directly.
Therefore, do not use a utility such as REGEDIT to change the OPOS
registry directly.
4."Invalid Hydra" tab
The "Invalid Hydra" tab contains the following fields.
"All invalid Hydra settings." check box
Select or clear multiple item in the list box, and this check box indicates
the type of the selection, as follows:
· If all items are selected
· If only some items are selected
125
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009
: this check box is selected.
: this check box is in an
undetermined state.
: this check box is cleared.
: this check box is selected.
: this check box is in an