Using Devices; Setting Up A Device - Epson H6000IIP - TM Two-color Thermal Line User Manual

5.7. Using Devices

This section explains how to set up or delete a device, using POSPrinter TM-T88IVM
as an example.

5.7.1. Setting up a Device

To set up POSPrinter TM-T88IVM as a device, use the "Add New Device" wizard of
SetupPOS.
Start the wizard either by selecting "Add New Device" from the Edit view, or clicking
the [Add New Device] button on the tool bar.
Or, select the POSPrinter in the left pane of the main window, and then right-click to
bring up a pop-up menu and select Add New Device. (In this case the step starts
from <Select device screen>.)
Following the instructions in each screen of the wizard, set up the device as
described in the following procedure.
(Operations in each screen)
[Next] button
[Back] button
[Cancel] button : Click this button to cancel the operation.
[Help] button
Perform these operations as required in each screen.
<Device class selection screen>
For device class: Select POSPrinter and then click the [Next] button.
<Device selection screen>
Select Device Name
Select detailed model : Select "TM-T88IVM."
Used Port
Device Description
INF File Name
[Browse] button
: Click this button to accept the changes in the current screen and
then proceed to the next screen.
: Click this button to clear the current settings and go back to the
previous screen.
: Click this button to display appropriate help.
: Select "TM-T88IVM."
: "COM" is displayed.
: "EPSON TM-T88IVM POS Printer" is displayed.
: INF file name of TM-T88IVM is displayed.
: Not used for this time.
(Use this button when selecting a different INF file of
User's Manual
Installer, SetupPOS, TMUSB
134
Version 2.65 Jul. 2009