Epson H6000IIP - TM Two-color Thermal Line User Manual page 26

(11) The "Port selection" dialog box is displayed.
Select the port.
When the Parallel port was selected, the Lilac parallel driver is installed.
When the USB port was selected, the TMUSB driver is installed.
Select the [Cancel] button for quitting.
(12) The "Setup Status" dialog box is displayed.
The progress is shown on the status bar.
The [Cancel] button works at this point, but do not press the [Cancel]
button unless there is a particular reason.
Operation after pressing the [Cancel] button is not guaranteed. If pressed,
Installer, SetupPOS, TMUSB
21
User's Manual
Version 2.65 Jul. 2009