Epson H6000IIP - TM Two-color Thermal Line User Manual page 135

(1) When changing the sleep time settings for TM-T88IVM and selecting an
another device, the following message appears:
"POSPrinter\TM-T88IVM has been changed. Do you want to save the
change?"
<Change of component dialog box>
(1) If the installer does not exists in the specified folder, the following message
appears:
" Fails to start up Setup.exe."
<Add New Device wizard>
(1) For browsing INF files, when specifying an illegal INF file, the following
message appears:
"Select a correct device class INF file."
(2) When the combination of master and slave devices is illegal, the following
message appears:
"The master device and the slave device combination is not proper.
You must use this device under proper device combination.The port setting
for this device will be UNDEFINED."
(3) When the combination with Hydra is improper, the following message
appears:
"Improper Hydra device(s) detected: Device will not be set as COMn. It will
leave the port setting UNDEFINED."
(4) When specifying an illegal Hydra connection, the following message
appears:
"This setting may cause a port conflict if the device is not setup propely. "
(5) When trying to connect a device, which requires a master device, to a port
by itself, and the master device cannot be found, then the following message
appears:
"No master device and the slave device combination is not proper. You must
use this device under proper device combination. The changes to the serial
port setting will be canceled. "
(6) When addition of a device causes its combination with the master device to
become improper, the following message appears:
"The master device and the slave device combination is not proper. You
must use this device under proper device combination. The port setting for
this device will be UNDEFINED."
130
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009