Epson H6000IIP - TM Two-color Thermal Line User Manual page 110

Selected Item
Device name key Add New Device
(display for each
port only)
CheckHealth Interactive
Device Specific Settings
Add New LDN
Communication Setting
Delete
Cut
Export Registry
Property
Help
Pop-up Menu
105
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009
Description
Use this menu command to display
the "Add New Device" wizard.
Use this menu command to start
CheckHealth Interactive.
Use this menu command to display
the "Device Specific Settings" dialog
box.
If the selected device does not
support device specific settings, then
this command is disabled.
Use this menu command to display
the "Add new logical device" dialog
box.
The key of the selected device name
appears as the default.
Use this menu command to display
the "Communication Setting" dialog
box.
If the selected device is not from
EPSON, then this command is
disabled.
Use this menu command to cut and
then delete the device.
Use this menu command to cut the
device to prepare it for moving.
Use this menu command to display
the "Export registry" dialog box.
Use this menu command to display
the following setting tabs: "Details of
device", " Communication Settings",
"Trace Settings", "Message Handling",
and "Sleep Time Settings" and
"DeviceStatistics Settings".
*1
It becomes key hook driver in case
of the MSR and Keylock.
Use this menu command to display
appropriate help to the device name
key.