Message During Driver Installation After Epson Opos Adk Installation; Messages When The Silent Mode Is Specified - Epson H6000IIP - TM Two-color Thermal Line User Manual

3.12.3. Message during Driver Installation after EPSON OPOS ADK Installation

Condition
There is no driver supporting the OS
currently used.
The Installation transaction of the parallel
driver is failed.
An error is returned during the installation
of the parallel driver.
An unexpected error is returned during
the installation of the parallel driver.
The update transaction of the parallel
driver is success.

3.12.4. Messages When the Silent Mode is specified

Condition
An illegal value is specified for the Silent
Installation command line.
An inexistent registry file is specified in
the command line.
The Silent mode's log file cannot be
created.
The Silent Installer log file cannot be
opened.
A unsupported registry file is specified in
the parameter.
The OS currently used is not supported.
Failed to the installation transaction of the
Parallel driver.
The Installer of the Parallel driver returned an
error.
An unexpected error is detected.
To use the Parallel interface, the PC must be
restarted.
To restart now, remove the disk and click
"Yes".
To restart later, click "No".
The form of the command line parameter is
illegal. Define it as follows.
setup /a"RegData.reg"
Registry File specified in the command line
parameter cannot be found.
Failed to make the silence log files.
Failed to open the Silent Installer log file.
Registry file specified in the command line is
illegal.
53
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009
Error Message
Error Message