Epson H6000IIP - TM Two-color Thermal Line User Manual page 97

<Switch-over of Hydra error code>
LineDisplay
CashDrawer
<Error Event processing>
Scanner
MSR
"POS Printer [Prior to Ver2.0]" check box
This check box is available only when using EPSON OPOS ADK version
1.xx.
Use this check box to specify the operation of BeginInsersion/
EndInsertion of slip.
If the check box is selected (default):
BeginInsertion only waits for insertion of Slip, and the printer has not yet
entered into the slip selection state. When EndInsertion selects slip after
the slip insertion is confirmed. The printer goes into the slip selection
state and slip printing becomes possible.
If the check box is cleared:
BeginInsertion/EndInsertion of OPOS ADK version 1.5x or earlier works.
Usually, select this check box (recommended).
To upgrade OPOS ADK from version 1.5x or earlier and enable the
existing applications to run in the new version without any modification,
clear this check box.
"MSR" check box
Use this check box to specify the operation of the data set by
TrackXData.
If the check box is selected (default):
Header and footer are not added to the data of the TrackXData
properties.
If the check box is cleared:
Operation follows the old specifications. Header and footer are added to
the data of the TrackXData properties.
Usually, select this check box (recommended).
To upgrade OPOS ADK from version 1.5x or earlier and enable the
existing applications to run in the new version without any modification,
clear this check box. For version 2.xx, because the equivalent properties
User's Manual
Installer, SetupPOS, TMUSB
92
Version 2.65 Jul. 2009