Values:
Print Always*
Print On Error
Print Disable
Fax Protocol
Purpose:
To set whether to print the protocol monitor report, which helps you identify the cause of a
communication problem.
Values:
Print Always
Print On Error
Print Disable*
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Port Status
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned off
and then on again.
Values:
Disable
Enable*
Prints a broadcast report after every fax broadcast.
Prints a broadcast report only when an error occurs.
Does not print a broadcast report after a fax broadcast to multiple destinations.
Prints a protocol monitor report after every fax transmission.
Prints a protocol monitor report only when an error occurs.
Does not print a protocol monitor report.
Disables the USB interface.
Enables the USB interface.
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX29 Series
User's Guide
252