Margin Top/Bottom - Epson AcuLaser CX29NF User Manual

3. Select N-Up, and then press the
4. Select the desired setting, and then press the
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Off*
Auto
ID Card Copy
Manual
5. If necessary, customize the copy settings including the number of copies, contrast, and image
quality.
See Also:
" Setting Copy Options" on page 130
6. Press the Start button to begin copying.
a When you are using the document glass and it is set to Auto, ID Card Copy, or Manual, the
display prompts you for another page.
Select Yes, and then press the
Another display prompts you for placing next page.
Replace the document with a new document.
Select Continue, and then press the

Margin Top/Bottom

To specify the top and bottom margins of the copy.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
button.
button.
Does not perform N-up printing.
Automatically reduces the original pages to fit onto one sheet of paper.
Prints the original pages onto one sheet of paper in the original size.
Prints the original pages onto the one sheet of paper in the size specified in Reduce/
Enlarge.
button.
button.
Epson AcuLaser CX29 Series User's Guide
Copying 147