Setting The Printer Id - Epson AcuLaser CX29NF User Manual

5. Select the region where the printer is used, and then press the
6. Select Yes, and then press the
The printer restarts automatically to apply the settings.
Note:
When you configure the region setting, the information registered to the device is initialized.

Setting the Printer ID

In most regions, you are required by law to indicate your fax number on any fax you send. The printer
ID, containing your telephone number and name or company name, will be printed at the top of each
page sent from your printer.
1. Press the System button.
2. Select Admin Menu, and then press the
3. Select Fax Settings, and then press the
4. Select Your Fax Number, and then press the
5. Enter your fax number using the numeric keypad.
Note:
If you make a mistake while entering numbers, press the C (Clear) button to delete the last digit.
6. Press the button when the number on the display is correct.
7. Select Company Name, and then press the
8. Enter your name or company name using the numeric keypad.
You can enter alphanumeric characters using the numeric keypad, including special symbols by
pressing the 1, *, and # buttons simultaneously.
For details on how to use the numeric keypad to enter alphanumeric characters, see "Using the
Numeric Keypad to Enter Characters" on page 302.
9. Press the button when the name on the display is correct.
button.
button.
button.
button.
button.
Epson AcuLaser CX29 Series
button.
User's Guide
Faxing 192