Epson AcuLaser CX29NF User Manual page 245

Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Ans Select is set to TEL/FAX Mode.
Values:
Off
Min
Middle
Max*
Line Type
Purpose:
To select the default line type.
Values:
PSTN*
PBX
Dialing Type
Purpose:
To select the dialing type.
Values:
PB*
DP(10PPS)
DP(20PPS)
Interval Timer
Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The
default is 8 seconds.
Turns off the volume of the ring tone.
Sets the volume of the ring tone to Min.
Sets the volume of the ring tone to Middle.
Sets the volume of the ring tone to Max.
Uses PSTN.
Uses PBX.
Uses tone dialing.
Sets "DP (10PPS)" (Dial Pulse, 10 Pulse Per Second) as the dial type.
Sets "DP (20PPS)" (Dial Pulse, 20 Pulse Per Second) as the dial type.
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX29 Series User's Guide
245