Epson AcuLaser CX29NF User Manual page 381
High- quality 4- in- 1
Hide thumbs
Also See for AcuLaser CX29NF:
- Setup manual (2 pages) ,
- Specifications (2 pages) ,
- Safety information manual (342 pages)
Table of Contents
Advertisement
Message
Insert
Drum Cartridge
CTD Sensor
Replace Soon
CTD Sensor Error
Restart Printer
Low Yellow Density.
Remove Yellow Toner,
Shake Cartridge,
and Reinstall.
Low Magenta Density.
Remove Magenta Toner,
Shake Cartridge,
and Reinstall.
Low Cyan Density.
Remove Cyan Toner,
Shake Cartridge,
and Reinstall.
Low Black Density.
Remove Black Toner,
Shake Cartridge,
and Reinstall.
Blk - CRUM Error
Error 093-925
Restart Printer
Invalid Toner
Black
Y - CRUM Error
Error 093-950
Restart Printer
What You Can Do
Open the front cover, and make sure that the drum cartridge is fully installed.
Clean the CTD sensor.
Remove and shake the yellow cartridge. Contact customer support if this failure
is repeated.
Remove and shake the magenta cartridge. Contact customer support if this
failure is repeated.
Remove and shake the cyan cartridge. Contact customer support if this failure is
repeated.
Remove and shake the black cartridge. Contact customer support if this failure is
repeated.
Turn off the printer. Confirm the black cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Open the side cover. Remove the unsupported black cartridge, and install a
supported cartridge.
Turn off the printer. Confirm the yellow cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Epson AcuLaser CX29 Series
Troubleshooting
User's Guide
381
Advertisement
Table of Contents
Troubleshooting
