Sharpness - Epson AcuLaser CX29NF User Manual

Normal*
Darker1
Darker2
Darker3
5. Press the Start button to begin copying.

Sharpness

To adjust the sharpness to make the copy image sharper or softer than the original.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ "Making Copies From the Document Glass" on page 126
❏ "Making Copies From the ADF" on page 129
2. Press the Copy button.
3. Select Sharpness, and then press the
4. Select the desired setting, and then press the
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Sharper
Normal*
Softer
5. Press the Start button to begin copying.
Works well with normal typed or printed documents.
Works well with light print or faint pencil markings.
button.
button.
Makes the copy image sharper than the original.
The color clarity of the image is the same as the original.
Makes the copy image softer than the original.
Epson AcuLaser CX29 Series User's Guide
Copying 141