Epson AcuLaser CX29NF User Manual page 37

8. Turn the screw clockwise.
9. Turn on the printer.
10. Print the System Settings page to confirm that the newly installed memory module is detected by
the printer.
a Press the System button.
b Select Report/List, and then press the
c Select System Settings, and then press the
The System Settings page is printed.
11. Confirm the amount of Memory Capacity listed under General in the System Settings page.
If the memory capacity has not increased, turn off the printer, unplug the power cord, and
re-install the memory module.
12. If you installed the additional memory module after installing the print driver, update your driver
by following the instructions for the operating system you are using. If the printer is on a network,
update the driver for each client.
Updating Your Driver to Detect Additional Memory Module
The following procedure uses Microsoft
Epson AcuLaser CX29 Series
button.
button.
® ®
Windows and the PCL 6 driver as an example.
User's Guide
Basic Operation 37