Epson AcuLaser CX29NF User Manual page 124

Installing a Print Driver Using the Add Printer Wizard
1. Click Start — Control Panel — Hardware and Sound — Printers (Start — Devices and
Printers for Windows Server 2008 R2 and Windows 7).
2. Click Add a printer to launch the Add Printer wizard.
3. Select Add a network, wireless or Bluetooth printer.
4. In the list of available printers, select the one you want to use, and then click Next.
Note:
❏ In the list of available printers, the WSD printer is displayed in the form of http://IP address/
ws/.
❏ If no WSD printer is displayed in the list, enter the printer's IP address manually to create a WSD
printer. To enter the printer's IP address manually, follow the instructions below.
For Windows Server 2008 R2, to create a WSD printer, you must be a member of Administrators
group.
1. Click The printer that I want isn't listed.
2. Select Add a printer using a TCP/IP address or hostname and click Next.
3. Select Web Services Device from Device type.
4. Enter the printer's IP address in Hostname or IP address and click Next.
❏ Before installing the driver using the Add Printer wizard on Windows Server 2008 R2 or
Windows 7, perform one of the following:
- Establish the Internet connection so that Windows Update can scan your computer.
- Add the print driver to your computer.
5. If prompted, install the print driver on your computer. If you are prompted for an administrator
password or confirmation, enter the password or provide confirmation.
6. Complete the additional steps in the wizard, and then click Finish.
7. Print a test page to verify print installation.
a Click Start — Control Panel — Hardware and Sound — Printers (Start — Devices and
Printers for Windows Server 2008 R2 and Windows 7).
Epson AcuLaser CX29 Series
Printing Basics
User's Guide
124