Color Balance - Epson AcuLaser CX29NF User Manual

See Also:
❏ "Making Copies From the Document Glass" on page 126
❏ "Making Copies From the ADF" on page 129
2. Press the Copy button.
3. Select Auto Exposure, and then press the
4. Select On, and then press the
5. Press the Start button to begin copying.

Color Balance

To specify the default color balance level within the range of -3 to +3.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ "Making Copies From the Document Glass" on page 126
❏ "Making Copies From the ADF" on page 129
2. Press the System button.
3. Select Defaults Settings, and then press the
4. Select Copy Defaults, and then press the
5. Select Color Balance, and then press the
6. Select the desired setting, and then press the
Note:
Values marked by an asterisk (*) are the factory default menu settings.
button.
button.
button.
button.
button.
button.
Epson AcuLaser CX29 Series User's Guide
Copying 143