Protrudent/Bumpy Paper
Problem
Printed surface got protrudent/bumpy.
Copy Problem
Problem
A document loaded in the ADF cannot
be copied.
Action
Clean up the fuser unit.
1. Load one sheet of paper on the SSF, and then print a solid image all over paper.
2. Load the printed sheet with the side to be printed on facing down, and then print
a blank sheet of paper.
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Action
Ensure that the ADF cover is firmly closed.
Ensure that the release lever is properly positioned.
Epson AcuLaser CX29 Series
Troubleshooting
User's Guide
353