Resetting The Counter Of The Fuser Unit; Replacing The Feed Roll Unit - Epson AcuLaser CX29NF User Manual
High- quality 4- in- 1
Hide thumbs
Also See for AcuLaser CX29NF:
- Setup manual (2 pages) ,
- Specifications (2 pages) ,
- Safety information manual (342 pages)
Table of Contents
Advertisement
4. Close the front cover.
5. Reconnect the power cord to the power connector and turn on the printer.
Resetting the Counter of the Fuser Unit
After replacing the fuser unit, use the operator panel to reset the counter of the fuser unit.
1. Press the System button.
2. Select Admin Menu, and then press the
3. Select Maintenance, and then press the
4. Select Reset Fuser, and then press the
5. Select Yes, and then press the
Replacing the Feed Roll Unit
This section describes how to replace the feed roll unit in the standard 250-sheet tray. Regularly
replacing the feed roll helps ensure the best quality output.
Epson feed rolls are available only through Epson.
It is recommended that you use Epson feed rolls for your printer. Epson does not provide warranty
coverage for problems caused by using accessories, parts, or components not supplied by Epson.
button.
button.
button.
button.
Epson AcuLaser CX29 Series
Maintenance
User's Guide
416
Advertisement
Table of Contents
Troubleshooting
