Appendix H Notes On Arp (Automatic Reduction Of Paper) And Automatic Logo Printing Function; Arp: Reduction Of Excessive Top Margin, Reduction Of Excessive Bottom Margin, Reduction Of Line; Spacing, And Reduction Of Line Spacing Where Extra Line Feeds Are Included; Arp: Reduction Of Bar Code Height - Epson EU-m30 Series Developer's Manual

Appendix H
H.1 ARP: Reduction of Excessive Top Margin, Reduction of Excessive Bottom Margin, Reduction
of Line Spacing, and Reduction of Line Spacing Where Extra Line Feeds Are Included
 Paper reduction is not performed for space dot lines of graphics printing data.
H.2

ARP: Reduction of Bar Code Height

 When reducing bar code height, reading of the bar code is not guaranteed. Be sure to check reading a bar code
with a user's bar code reader in advance.
H.3

Automatic Logo Printing Function

 The automatic bottom logo printing is a function of logo printing that works with an autocutting command and
produces good printing quality when using the GS V m n (paper feeding + paper cutting) command. When
using cutting-only commands (GS V m, ESC i, or ESC m), extra line spacing above a bottom logo occurs,
depending on the paper feeding command before the cutting command.
 When printing a top logo during paper feeding to the cutting position, the GS V m n (paper feeding + paper
cutting) command will produce good printing quality. When using cutting only commands, printing a logo
before cutting is not performed.
NOTES ON ARP (AUTOMATIC REDUCTION OF PAPER) AND
AUTOMATIC LOGO PRINTING FUNCTION
55