Basic Scanning Operation
1. Position the document to be scanned.
Note:
For details on positioning the document, refer to "Placing a document on the original glass" on page
69 and "Loading a document into the ADF (AcuLaser CX16NF only)" on page 71.
2. Press the Scan key to enter Scan mode.
3. Specify the desired scan settings.
4. To scan color scans, press the Start-Color key. To scan monochrome scans, press the Start-B&W
key.
If the document was loaded in the ADF, scanning begins, and then the data is sent to the specified
location. If the document was placed on the original glass, continue with step 5.
5. When NEXT PAGE? appears in the message window, place the second document page on the
original glass, and then press the Select key.
AcuLaser CX16 Series
Printer / Copier / Scanner User's Guide
Using the Scanner
97