Epson AcuLaser CX16 User Manual page 109

3. Press the u or d key to select SPEED DIAL, and then press the Select key.
4. Use the keypad to type in the number (between 1 and 220) for the speed dial destination, and then
press the Select key.
5. Press the u or d key to select MANUAL SETTING, and then press the Select key.
Note:
If an LDAP server is not specified, step 5 is skipped.
6. Use the keypad to type in the registration name, and then press the Select key.
Note:
❏ For details on entering/editing text, refer to the Facsimile User's Guide.
❏ A maximum of 20 characters can be entered.
7. Use the keypad to type in the e-mail address, and then press the Select key.
The settings are registered, and the DIAL REGISTER menu appears again.
Note:
A maximum of 64 characters can be entered.
Registering Speed Dial Destinations (LDAP Search)
E-mail addresses can be registered as speed dial destinations by using information on the LDAP
server. A maximum of 250 speed dial destinations can be registered.
Note:
❏ To connect to an LDAP server, settings for LDAP SETTING must be specified. For details, refer to the
Reference Guide.
❏ Machine key operations cannot be used to register an FTP address or SMB address as a speed dial
destination. These addresses can be registered with Local Setup Program or EpsonNet Config. For
details, refer to the Reference Guide.
❏ Speed dial destination numbers 221 to 250 are reserved for registering FTP addresses and SMB
address from Local Setup Program or EpsonNet Config.
1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select
key.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
AcuLaser CX16 Series Printer / Copier / Scanner User's Guide
Using the Scanner 109