Epson AcuLaser CX16 User Manual page 35

Paper size
Select the type and size of the media loaded into Tray 1. If CUSTOM(PLAIN) or CUSTOM(THICK) is selected as the paper
size, specify settings for LENGTH and WIDTH separately.
The setting range for LENGTH is 195 to 356 mm for PLAIN PAPER, and 184 to 297 mm for THICK1 and THICK2.
The default setting is 297 mm.
The Setting range for WIDTH is 92 to 216 mm.
The default setting is 210 mm.
When a media type is selected, a screen appears, showing the available media sizes. The available media sizes differ
depending on the selected media type.
Note:
When printing from the printer driver, the printer driver settings have priority over the settings specified in the TRAY1
PAPER SETUP menu. Check that Tray 1 is loaded with media of the type and size specified in the printer driver.
ADMIN. MANAGEMENT Menu (AcuLaser CX16NF only)
Note:
❏ The ADMIN. MANAGEMENT menu is accessible only by the administrator. To display the settings
for this menu, select ADMIN. MANAGEMENT, use the keypad to type in the 6-digit administrator access
code (default: 000000), and then press the Select key.
❏ Manufacturer's default settings appear in bold.
ADMINISTRATOR NO.
AcuLaser CX16 Series
The available paper sizes differ depending on the setting selected as the media type.
Setting selected as the media type
PLAIN PAPER
THICK1, THICK2
LETTERHEAD, LABELS
ENVELOPE
POSTCARD
Printer / Copier / Scanner User's Guide
Available paper sizes
A4 / A5 / B5 / LEGAL / LETTER / G LETTER /
STATEMENT / EXECUTIVE / FOLIO /
OFICIO / G LEGAL / CUSTOM(PLAIN)
A4 / A5 / B5 / LETTER / G LETTER /
STATEMENT / EXECUTIVE /
CUSTOM(THICK)
A4 / A5 / B5 / LETTER / G LETTER /
STATEMENT / EXECUTIVE
C6 / DL
The screen for selecting the paper size
does not appear, and the following paper
size is automatically specified.
100 × 148 mm
[3.9 × 5.8 inch]
Specify the new administrator access code.
Control Panel and Configuration Menu 35