Epson AcuLaser CX16 User Manual page 39

SMTP TIMEOUT
TEXT INSERT
POP BEFORE DISABLE/
SMTP ENABLE
POP3 SERVER
*2
ADDR.
POP3 PORT
*2
NO.
POP3
*2
TIMEOUT
POP3
*2
ACCOUNT
POP3
PASSWORD
SMTP AUTH. DISABLE/
ENABLE
SMTP USER
*3
NAME
SMTP
PASSWORD
AcuLaser CX16 Series Printer / Copier / Scanner User's Guide
Setting 30 to 300 sec (Default: 60 sec)
Select the amount of time (in seconds) until the connection
with the SMTP server times out.
Setting OFF / ON
Select whether or not the specified text is inserted into the
E-mail message.
Setting
DISABLE / ENABLE
Select whether or not to enable POP Before SMTP.
If ENABLE is selected, specify the time (between 0 and 60
seconds). The default setting is 5sec.
Specify the host name or IP address (up to 64 characters) for
the POP3 server used for authentication with POP Before
SMTP.
The default setting is "0.0.0.0".
Setting 1 to 65535 (Default: 110)
Specify the port number used for communicating with the
POP3 server.
Setting 30 to 300 sec (Default: 30 sec)
Select the amount of time (in seconds) until the connection
with the POP3 server times out.
Specify the user name (up to 63 characters) used for authen-
tication with POP3 server.
The default setting is blank.
Specify the password (up to 15 characters) used for authen-
*2
tication with POP3 server.
The default setting is blank.
Setting
DISABLE / ENABLE
Select whether or not to enable SMTP authentication.
Specify the user name (up to 63 characters) used for SMTP
authentication.
The default setting is blank.
Specify the password (up to 15 characters) used for SMTP
*3
authentication.
The default setting is blank.
Control Panel and Configuration Menu 39