Epson AcuLaser CX16 User Manual page 46

NO. of RINGS
REDUCTION RX
RX PRINT
RX MODE
FORWARD
FOOTER
AcuLaser CX16 Series
Setting 1 to 16 (Default: depends on PTT SETTING)
Enter the number of rings (between 1 and 16) until the machine automatically begins
receiving the fax when an external telephone is connected.
Setting OFF / ON / CUT
Select whether documents longer than the current paper size are printed reduced,
split, or discarded.
OFF: The document is printed at full size and split onto multiple pages.
ON: The document is printed at a reduced size.
CUT: The document is printed, but any part that does not fit within the page is erased.
Setting
MEMORY RX / PRINT RX
Select whether the fax is printed only after all document pages have been received or
printing begins as soon as the first page of the document is received.
MEMORY RX: Printing begins after all pages have been received.
PRINT RX: Printing begins after the first page has been received.
Setting
AUTO RX / MANUAL RX
Select whether the reception mode is set to automatic reception or manual reception.
AUTO RX: Automatically begins receiving the fax after the set number of rings.
MANUAL RX: Does not automatically receive the fax. Reception begins after making a
connection by picking up the telephone receiver or pressing the On hook key, then
pressing the Start key.
Setting
OFF / ON / ON(PRINT)
Select whether or not to forward received fax documents.
OFF: Select this setting to not forward the document.
ON: Select this setting to forward the received fax document to the specified fax
number or e-mail address.
ON(PRINT): Select this setting to forward the received fax document to the specified
fax number or e-mail address at the same time that the machine prints it.
Setting OFF / ON
Select whether or not the reception information (date received, number of pages, etc.)
is printed at the bottom of each received document.
Printer / Copier / Scanner User's Guide
Control Panel and Configuration Menu 46