Replacing A Toner Cartridge - Epson AcuLaser CX16 User Manual

Replacing a Toner Cartridge

Note:
Be careful not to spill toner while replacing a toner cartridge. If toner spills, immediately wipe it off with a
soft, dry cloth.
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to ON, the message TONER OUT/
CHANGE X TONER (where "X" indicates the color of the toner) appears when the toner cartridge is
nearly empty. Follow the steps below to replace the toner cartridge.
Note:
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to OFF, printing can continue even
after the message "Toner Out X" has appeared; however, the printing quality cannot be guaranteed. If
printing is continued and the toner becomes empty, the message "TONER LIFE END/CHANGE X TONER"
appears and printing stops. For details on the setting, refer to "MACHINE SETTING Menu" on page
32.
1. Check the message window to see which color toner cartridge needs replacing.
Note:
If the machine detects that a toner cartridge is empty (TONER OUT or TONER LIFE END appears), the
empty toner cartridge is automatically moved so that it can be replaced.
If you wish to change the toner cartridge, use ether operation described below to switch the printer
to REPLACE MODE.
2. With the main screen displayed, press the l key to display the PRINTER MODE screen.
3. Press the d key to select T/C CHANGE and then press the Select key.
4. Press the Select key to select REPLACE MODE.
5. Press the u or d key to select the color for the toner cartridge to be replaced, and then press the
Select key.
The toner cartridges rotate within the machine to move the toner cartridge of the selected color to
a position where it can be replaced.
Note:
To exit REPLACE MODE, press the Stop/Reset key.
AcuLaser CX16 Series Printer / Copier / Scanner User's Guide
Replacing Consumables 119