Epson AcuLaser CX16 User Manual page 45

QUALITY PRIORITY
DEFAULT TX
HEADER
FAX RX OPERATION Menu (AcuLaser CX16NF only)
Note:
Manufacturer's default settings appear in bold.
MEMORY RX MODE
AcuLaser CX16 Series
Setting
STD/TEXT, FINE/TEXT, S-FINE/TEXT, STD/PHOTO, FINE/
PHOTO, S-FINE/PHOTO
Select the default scanning resolution (fax document quality).
STD/TEXT: Select this setting for documents containing handwriting or for computer
printouts.
FINE/TEXT: Select this setting for documents containing small print.
S-FINE/TEXT: Select this setting for documents containing small print, such as
newspapers, and documents containing detailed illustrations.
STD/PHOTO: Select this setting for photo documents containing regular photos.
FINE/PHOTO: Select this setting for photo documents containing fine images.
S-FINE/PHOTO: Select this setting for photo documents containing finer images.
Setting MEMORY TX / DIRECT TX
Select the desired method for sending documents.
MEMORY TX: With this method, the fax transmission starts after the entire document is
scanned and stored in the memory. The total number of pages is automatically prin-
ted with the page number in the header. However, the memory may become full if
there are many pages in the document or if the data is large due to the fine image
quality (resolution).
DIRECT TX: With this method, the transmission is performed in real time in the trans-
mission sequence of the destinations. If there are many pages in the document, the fax
can be sent with this method without the memory becoming full.
Setting OFF / ON
Select whether or not to print transmission source information (date/time of trans-
mission, sender's name, sender's fax number, session number and page number) for
the machine in the transmitted document.
Setting OFF / ON
Select whether to allow (ON) memory reception or not (OFF). Select ON not to print
when receiving confidential faxes or when no one is around, for example, at night. The
received documents can be stored in memory and printed at a specified time or when
memory reception is turned off (this function is set to OFF).
A password can be set to specify the starting time or ending time of memory recep-
tion, or to cancel the function. The set starting time and ending time are valid every
day until memory reception is turned off.
Printer / Copier / Scanner User's Guide
Control Panel and Configuration Menu 45