Table of Contents
Advertisement
Selecting an Image Quality
Noise Reduction
[Noise reduction]
HDMI
Digital PC
You can reduce image noise.
MENU > [Image adjustment] > [Advanced
adjustment] > [Noise reduction]
Off
Disables noise reduction.
Weak
Specifies the intensity of the noise
Middle
reduction in three steps.
Strong
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default for HDMI (when [HDMI
In] (P127) is set to [Auto]) is [Off] and
when Component is used, it is set to
[Weak].
• Noise reduction may produce motion arti-
facts when projecting fast-moving images.
• Select [Weak] for fast-moving images.
Select [Strong] for slow-moving images.
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
• When [HDMI In] (P127) is [Computer], this
setting is not displayed.
Dynamic Gamma
[Dynamic gamma]
Component
Analog PC
You can adjust the gradation representa-
tion of light and dark portions of an image
automatically.
MENU > [Image adjustment] > [Advanced
adjustment] > [Dynamic gamma]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default settings are [Off] when
• The adjustment you have made is stored
116
HDMI
Digital PC
Off
Dynamic gamma is disabled.
Weak
Specifies the intensity of the
Middle
dynamic gamma in three steps.
Strong
the connected equipment is a Computer
(ANALOG PC, DIGITAL PC, HDMI (when
[HDMI In]
P127) is [Computer])) and
(
[Weak] when the connected equipment is
AV equipment (COMPONENT, HDMI
(when [HDMI In] (P127) is [Auto])).
as adjusted values for the input signals
and image mode of the current projection.
Component
Analog PC
Advertisement
Table of Contents
