Connecting To Analog Video Output Terminal (Analog Connection) - Canon REALiS WUX4000 Pro AV User And Installation Manual

■Connecting to Analog Video Output Terminal (Analog Connection)

Connecting with a component cable (Input signal type: [Component] – P59)
A component video signal from the AV equipment can be inputted into the projector by
connecting the component cable to the COMPONENT IN terminal of the projector.
Use a commercially available component cable (not included) that fits the terminal type of
the AV equipment to create a relay connection.
AV equipment
RCA component
terminal
D terminal
Video output ter-
minal
Monitor output
terminal (DVI ter-
minal)
RCA terminal
Mini jack
AUDIO output terminal
RCA plug - RCA plug component cable
(not included)
D terminal plug - RCA plug component
conversion cable (not included)
DVI-D cable (not included)
When inputting corresponding audio
Audio cable (not included)
Connecting the Projector
Component cable
(not included)
53
Projector
To ANALOG PC / COMPONENT
IN terminal
To AUDIO IN terminal