Adjusting The Focus - Canon REALiS WUX4000 Pro AV User And Installation Manual

Adjusting the Focus

To adjust the focus, press the FOCUS button on the remote control or the LENS button on
the projector.
For the projection distances of the lens unit, refer to
1
Press either the FOCUS button on the remote control or the LENS button on the pro-
jector in order to display the window shown below.
Remote control
2
Press the pointer buttons to adjust the focus.
Remote control
Use the [ ] button on the remote control, or the UP button on the projector to adjust the
focus position.
Use the [ ] button on the remote control, or the DOWN button on the projector to per-
form fine adjustment.
3
When the focus is adjusted optimally, press the OK button or the FOCUS button.
page 156.
Projector
Projector
73
Adjusting the Image
Remote control
Remote control