Table of Contents
Advertisement
Setting Display Status
Reversing Projection
[Image flip H/V]
HDMI
Digital PC
Select this setting if you want to hang the
projector from the ceiling or project an
image from behind the screen.
MENU > [Display settings] > [Image flip H/V]
MENU > [Install settings] > [Image flip H/V]
None
Select this to project an image
normally.
Ceiling
Select this to project an image
mounted
with the projector hung from the
ceiling.
The projected image is inverted
in both vertical and horizontal
directions.
Rear
Select this to project an image
from behind the screen.
The projected image is inverted
in the horizontal direction.
Component
Analog PC
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [None] is the factory default.
104
Rear, Ceil-
Select this to project an image
ing mounted
from behind the screen with the
projector hung from the ceiling.
The projected image is inverted
in the vertical direction.
Advertisement
Table of Contents
