Connecting The Projector; Connecting The Projector To A Computer; Connecting To Rgb Monitor Output Terminal (Analog Connection) - Canon REALiS WUX4000 Pro AV User And Installation Manual

Connecting the Projector

Connecting the Projector to a Computer

Connect the projector to the computer.
A digital connection (P50) is recommended when projecting an image in high quality.
When using a computer with an HDMI output terminal, a digital connection (P51) can be
made using an HDMI cable.
Before connecting the cables, turn off both the projector and computer.

■Connecting to RGB Monitor Output Terminal (Analog Connection)

Connecting with a VGA cable (Input signal type: [Analog PC] (WUX5000 / WUX4000),
[Analog PC-1] (WX6000 / SX6000) P59)
Computer
Monitor output
terminal
(mini D-sub 15-pin)
AUDIO output terminal
(AUDIO OUT)
VGA cable (supplied)
When inputting corresponding audio
Audio cable (not included)
To ANALOG PC /
COMPONENT IN terminal
To AUDIO IN terminal
47
Projector