Table of Contents
Advertisement
(1)
(1)LAN port (P166)
Connects the LAN cable.
Used to connect the projector to a network.
(2)ANALOG PC-1 / COMPONENT IN terminal
(
/COMPONENT IN) (P47, P53)
Receives the analog PC signal (Analog PC-1).
A component cable can be used to receive the component image signal (Component).
(3)ANALOG PC- 2 / DVI-I IN terminal (
Connects the external monitor output from a computer.
Receives the digital PC signal (Digital PC) or analog PC signal (Analog PC-2).
(4)HDMI IN terminal (HDMI IN) (P51)
Receives the digital content image signal (HDMI).
Carries both video and audio signals across a single cable.
(5)Service port (CONTROL)
This terminal is used by servicing technicians. It is not used during ordinary use.
(6)Terminal for wired remote control (REMOTE) (P30)
This terminal is used to connect the remote control using a cable.
(7)AUDIO IN terminal (AUDIO IN) (P47, P50, P53)
Receives the audio signal input for 2 kinds of image input except HDMI IN.
The internal speaker outputs the audio for the selected image signal.
(8)AUDIO OUT terminal (
Outputs the audio to external AV equipment. This outputs the audio signal that corre-
sponds to the projected image signal.
(2)
(3)
AUDIO OUT) (P51, P55)
(4)
(5)
DVI-I IN) (P50)
41
Part Names
(6)
(7)
(8)
Advertisement
Table of Contents
