Table of Contents
Advertisement
Setting Various Functions
Selecting the Power Man-
agement Mode
[Power management mode]
HDMI
Digital PC
You can turn off the lamp or projector auto-
matically in order to save power when the
projector is not in use.
MENU > [System settings] > [Power manage-
ment mode]
MENU > [System settings] > [Power manage-
ment mode]
Off
Disables the power management
mode.
Standby If no input signal is received for 30
seconds, the countdown will be dis-
played and after 5 minutes, the
lamp will turn off.
If it receives an input signal or is
operated during this period, it
resumes projection.
Press the OK button to accept your setting
Component
and then press the MENU button or EXIT
Analog PC
button (WX6000 / SX6000).
• [Off] is the factory default.
• During standby mode, the [POWER ON]
• You cannot enable the [Direct power on]
120
Exit
If no input signal is received for 30
seconds, it displays the countdown
and turns off the projector after 5
minutes.
indicator and [STAND BY] indicator flash
alternately.
function (see the next item), if you select
[Off].
Advertisement
Table of Contents
