Table of Contents
Advertisement
Configuring the Network From the Computer
The following information is displayed.
Projector name
Location
MAC address
IP address
Power Status
Lamp Time *1
Lamp Time Normal Mode *2
Lamp Time Quiet Mode *2
Lamp Time Converted *2
Filter Time
Alert
*1 WUX5000 / WX6000 / SX6000
*2 WUX4000
To operate the projector from the computer, click [Projector control] (
4
To configure, click [Settings].
The settings window appears.
The name of the projector on the network
The location of projector installation
The MAC address of the projector
The IP address of the projector
The power status of the projector
Lamp operating time
Lamp operating time in [Normal] lamp mode
Lamp operating time in [Quiet] lamp mode
Lamp operating time (converted value)
Air filter operating time
Error message (if an error has occurred)
Temperature abnormality
Faulty lamp
Faulty lamp cover
Faulty cooling fan
Faulty power supply
Faulty lens connector: Lens connector error
Faulty air filter unit: Air filter error
Unknown error
178
).
P188
Advertisement
Table of Contents
