Image Adjustment Menu - Canon REALiS WUX4000 Pro AV User And Installation Manual

Image Adjustment Menu

COMMON
Image mode
Standard *
Photo/sRGB
User 1 - 5 (as creating
profile)
Digital PC / Analog PC /
HDMI (when [HDMI In]
is [Computer])
Presentation
VividPhoto
Component /
(when [HDMI In] is [Auto])
Dynamic
Video
Cinema
Create Profile P110
Baseline Image P110
Mode (when user
memory is selected)
Brightness P111
Contrast P112
Sharpness P113
Gamma P113
Color adjustment P114
Color level
Color balance
Color temperature
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
P109 Advanced adjustment
P109
HDMI
P109
Lamp mode *4
Reset
Factory default settings for *1, *2 and *3 are set accord-
ing to the following conditions.
*1: • For Analog PC, Digital PC or HDMI (when [HDMI
*2: • For HDMI (when [HDMI In] is [Auto]), the factory
*3: • For HDMI (when [HDMI In] is [Computer]), Digi-
*4: • WUX4000
233
Menu Configuration
Ambient light Off *
Adjust
Type
Level
Return
Component /
Noise reduction *2
Off
Weak
Middle
Strong
Dynamic gamma Off *1
Weak *2
Middle
Strong
Mem. color correct *3 Off
L
M
H
6-axis color adjust Off *
Adjust
Reset
Fine-Tune Gamma P118
Return
Normal *
Quiet
OK / Cancel
In] is [Computer]), the factory default is [Off].
• For Component, and HDMI (when [HDMI In] is
[Auto]), the factory default is [On].
default is [Off].
• For Component, the factory default is [Weak].
tal PC or Analog PC, if any image mode is used
except [VividPhoto], the factory default is [Off].
If [VividPhoto] is used, the factory default is
[Middle].
• For HDMI (when [HDMI In] is [Auto]) or Compo-
nent, the factory default is [Weak], regardless of
the image mode.
P115
Tungsten
Fluorescent
Fluores-
cent H
L
M
H
HDMI P116
P116
P117
P117
Hue / Saturation /
Brightness
P119
P119