Table of Contents
Advertisement
Setting Various Functions
Showing / Hiding the
Guide Screen
[Guide]
HDMI
Digital PC
You can select whether to show or hide the
guide screen which explains operations.
MENU > [System settings] > [Guide]
MENU > [Install settings] > [On screen] >
[Guide]
Off
Hides the guide screen.
On
Shows the guide screen.
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [On] is the factory default.
• The guide screen is shown at the following
times.
-
Power is turned off by pressing the
POWER button. (P80)
Component
Analog PC
126
-
No input signal can be detected. (P58)
-
An invalid button is pressed in the
[BLANK],
[FREEZE]
mode. (P82, P84)
-
When the positional lock (P139) is set to
[On] (WX6000 / SX6000)
or
[D.ZOOM]
Advertisement
Table of Contents
