Setting An Ip Address; Windows 7 - Canon REALiS WUX4000 Pro AV User And Installation Manual

Setting an IP Address

Following is an explanation of how to set the PC IP address for each operating system.

■Windows 7

1
From the PC [Start] menu, select [Control Panel].
2
Click on [Network and Internet Connections], then click on [View network status and
tasks].
3
From the menu on the left side of the window, click on [Change adapter settings].
4
Right-click [Local Area Connection], and open [Properties].
5
Select [Internet Protocol Version 4 (TCP/IP)] and click the [Properties] button. Make a
note of the original network settings (IP address, subnet mask, default gateway, etc).
6
Select [Use the following IP address] and set the IP address and subnet mask.
The factory default IP address for the projector is "192.168.254.254". Set an IP
address which is different from this.
Example
IP address:192.168.254.1
Subnet mask: 255.255.255.0
7
When the settings are completed, click the [OK] button and then click the [OK] button
on the [Local Area Connection Properties] window to close it.
Preparing the Remote Control
167