Turning The Printer On And Off - Canon imagePROGRAF iPF6200 User Manual

Turning the Printer On and Off

Turning the printer on
1.
Press the Power button to turn on the printer.
The printer will now start up.
After the Display Screen shows the Canon logo, Starting up... Please wait. is displayed.
2.
The printer goes online in preparation for printing after startup, and the Online lamp and paper
source section lamp remain lit.
The printer will not go online in the following situations. Take action as needed.
•
The Top Cover is open
Close the Top Cover.
•
The Ink Tank Cover is open
Close the Ink Tank Cover.
•
The Printhead is not installed
Please see "Replacing the Printhead". (→P.626)
•
Ink Tank is not installed
Please see "Replacing Ink Tanks". (→P.615)
•
"ERROR" is shown on the Display Screen
Turn off the printer and contact your Canon dealer.
•
The Online lamp and Message lamp are not lit (even once), and nothing appears on the Display
Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.
•
No paper is loaded
Load paper. (→P.93) (→P.98)
Control Panel
Printer Parts 27