The Edges Of The Paper Are Dirty - Canon imagePROGRAF iPF6200 User Manual

The edges of the paper are dirty

The Platen has become dirty after borderless printing
or printing on small paper.
The paper type as specied on the printer does not
match the type specied in the printer driver.
The paper is wrinkled or warped.
A cut line is printed because the function to reduce
cutting dust has been activated.
The Printhead is set too low.
You are printing on heavyweight paper or paper that
curls or wrinkles easily after absorbing ink.
The Ejection Guide is soiled.
Cause
Problems with the printing quality
Corrective Action
Open the Top Cover and clean the Platen.
(→P.641)
Make sure the same paper type is specied on the
printer as in the printer driver.
(→P.117)
(→P.149)
Make sure the same paper type is specied in the
printer driver as on the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the paper type in the printer driver and
try printing again.
Straighten out the wrinkles or curls and reload the
paper. Do not use paper that has been printed on
previously.
(→P.122)
(→P.151)
If this function is not needed, deactivate
CutDustReduct. through the printer menu.
(→P.59)
In Head Height, choose Automatic. (→P.576)
When printing on Heavyweight Coated Paper or
other paper-based media, choose a VacuumStrngth
setting of Strong, or Strongest. If the paper is still
scratched, try setting the Printhead level in Head
Height to Highest. (→P.587) (→P.576)
When printing on CAD Tracing Paper or other
lm-based media, choose a VacuumStrngth setting
of Standard, Strong, or Strongest. If the paper is
still scratched, try setting the Printhead level in Head
Height to Highest. (→P.587) (→P.576)
If edges of the paper curl and become soiled when
printing on rolls of glossy photo paper, in Paper
Detailed Settings in the printer driver, set Near End
Margin to 20mm.
Clean the Ejection Guide. (→P.640)
Troubleshooting 669