Canon imagePROGRAF iPF6200 User Manual page 431

Ambient Light Adjust
When you select By selecting a chart number in Setting Method
Setting Item
A
Setting Method
B
Print Chart
C
Chart Number
D
Color Temperature
E
Illuminance
When you select By entering values directly in Setting Method
Setting Item
A
Setting Method
B
Lighting Source Type
D
Color Temperature
E
Illuminance
Note
•
For details on settings items, see "Adjusting the Color in the Printer Driver". (→P.206)
You can choose conguration based on the printed Chart or based on
using the i1 colorimeter.
Click to start the Light Source Check Tool, for printing Charts. The Light
Source Check Tool must be installed to use this function.
In Chart, select the number of the pattern with your desired colors.
Enter the Color Temperature measured during monitor calibration.
Displayed when the Matching Method is set to Monitor Matching on
the Matching sheet.
Enter the Illuminance measured during monitor calibration. Displayed
when the Matching Method is set to Monitor Matching on the Matching
sheet.
You can choose conguration based on the printed Chart or based on
using the i1 colorimeter.
Select the light source measured using the i1 colorimeter.
Enter the Color Temperature measured using the i1 colorimeter.
Enter the Illuminance measured using the i1 colorimeter.
Displayed when the Matching Method is set to Monitor Matching on
the Matching sheet.
Description
Description
Printer Driver
Windows Software 417