This Paper Cannot Be Used; Roll Printing Is Selected; Roll Printing Is Selected, But Sheets Are Loaded - Canon imagePROGRAF iPF6200 User Manual

This paper cannot be used.

Check supported paper sizes.
The loaded paper is too large for the printer.
The loaded paper is too small for the printer.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.

Roll printing is selected.

You have attempted to print a test print sheet or
other printer status information on a roll, but no roll
is loaded.

Roll printing is selected, but sheets are loaded.

A print job for rolls was received when a sheet is
loaded.
Cause
Cause
Cause
Corrective Action
Load paper of the correct size.
(→P.113)
Load paper of the correct size.
(→P.113)
Load unused paper A4/Letter-sized or larger. More
than one sheet may be required depending on the
adjustment.
Corrective Action
Load a roll and try printing again.
To print on a sheet instead, hold the Stop button for
more than a second to cancel printing, load a sheet,
and then print. (→P.98)
Corrective Action
Press the OK button and remove the sheet.
(→P.157)
Load a roll and try printing again.
(→P.122)
Hold down the Stop button for a second or more to
cancel printing.
Messages regarding paper
Error Message 691