Paper Size Not Detected - Canon imagePROGRAF iPF6200 User Manual

Messages regarding paper

Paper size not detected.

Paper has been loaded askew, or warped paper has
been loaded.
*If this message is displayed, you can resume the print job.
Insufcient paper for job
The printer has received a print job longer than the
amount of roll paper left.
690 Error Message
Cause
Cause
Corrective Action
Reload paper straight, in the correct position.
(→P.122)
(→P.151)
Corrective Action
Follow the steps below to replace the roll.
1.
Remove the roll.
(→P.124)
(→P.125)
(→P.126)
2.
Load a roll with enough paper left.
(→P.119)
(→P.121)
(→P.122)
3.
If no barcode was printed on the roll, specify the
paper type.
(→P.117)
4.
Select the paper length, unless a barcode was
printed on the roll and you have deactivated
automatic detection of the remaining roll paper.
(→P.118)
Hold down the Stop button for a second or more to
cancel printing.
Press the Online button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.